Fr Configurator Sw3 Software Download ##HOT##
Click Here >>> https://urluso.com/2tzJsH
```html
How to Download and Install FR Configurator SW3 Software for Mitsubishi Inverters
FR Configurator SW3 is a software that allows you to easily configure, monitor and troubleshoot Mitsubishi inverters. It is compatible with the following series of inverters: FR-A700, FR-A701, FR-D700, FR-E700 and FR-E700SC[^2^]. In this article, we will show you how to download and install FR Configurator SW3 software on your Windows PC.
Step 1: Download FR Configurator SW3 Software
You can download FR Configurator SW3 software from the official website of Mitsubishi Electric FA[^1^]. Click on the "Download" button and save the zip file to your computer. The file size is about 200 MB.
Step 2: Extract the Zip File
After downloading the zip file, you need to extract it to a folder on your computer. You can use any software that can handle zip files, such as WinZip or 7-Zip. Right-click on the zip file and choose "Extract All" or "Extract Here". You will see a folder named "FR-Configurator_SW3_V1.20L" or similar.
Step 3: Run the Setup Program
Open the extracted folder and double-click on the setup.exe file. This will launch the installation wizard of FR Configurator SW3 software. Follow the instructions on the screen to complete the installation. You may need to log on as an administrator and close any other applications before installing. You may also need to disconnect any inverters connected by USB cable before installing[^2^].
Step 4: Launch FR Configurator SW3 Software
After the installation is finished, you can launch FR Configurator SW3 software from the Start menu or the desktop shortcut. You will see a user interface with four main areas: navigation area, monitor area, system area and setting wizard[^3^]. You can use these areas to perform various tasks with your Mitsubishi inverters, such as setting parameters, monitoring status, saving data, updating firmware and troubleshooting errors.
Conclusion
FR Configurator SW3 software is a useful tool for anyone who works with Mitsubishi inverters. It can help you to set up, maintain and troubleshoot your inverters easily and efficiently. To download and install FR Configurator SW3 software, you just need to follow four simple steps: download the zip file from the official website, extract it to a folder, run the setup program and launch the software. We hope this article has been helpful for you. If you have any questions or comments, please feel free to contact us.
```
```html
How to Connect FR Configurator SW3 Software to Mitsubishi Inverters
Once you have installed FR Configurator SW3 software on your PC, you can connect it to your Mitsubishi inverters using a USB cable or an RS-485 communication cable. The USB cable is recommended for a simple and fast connection, while the RS-485 cable is suitable for a long-distance and multi-inverter connection. Here are the steps to connect FR Configurator SW3 software to your inverters:
Connect one end of the USB cable or the RS-485 cable to the PU connector of your inverter. If you are using an RS-485 cable, you may need an RS-485-to-RS-232C or USB-to-RS-485 converter.
Connect the other end of the cable to the USB port or the serial port of your PC.
Launch FR Configurator SW3 software and click on the "Connect" button in the navigation area. You will see a dialog box where you can select the communication port, the baud rate and the inverter type.
Select the appropriate settings for your connection and click on "OK". The software will try to communicate with your inverter and display its status in the monitor area.
If the connection is successful, you can start using FR Configurator SW3 software to configure, monitor and troubleshoot your inverter. If the connection fails, you can check the error message and try to fix the problem.
How to Use FR Configurator SW3 Software to Configure Mitsubishi Inverters
FR Configurator SW3 software allows you to easily configure your Mitsubishi inverters by setting various parameters. You can use the setting wizard or the parameter list to set the parameters according to your needs. Here are the steps to use FR Configurator SW3 software to configure your inverters:
Connect FR Configurator SW3 software to your inverter as described in the previous section.
Click on the "Setting Wizard" button in the navigation area. You will see a dialog box where you can select a preset application or a custom application for your inverter.
Select the application that matches your purpose and click on "Next". The software will guide you through a series of steps where you can set the basic parameters for your inverter, such as frequency, acceleration/deceleration time, torque boost, etc.
After setting the basic parameters, you can click on "Finish" to save them to your inverter. You can also click on "Advanced" to set more parameters for your inverter, such as protection functions, output signals, PID control, etc.
If you want to use the parameter list instead of the setting wizard, you can click on the "Parameter List" button in the navigation area. You will see a list of all the parameters for your inverter with their names, values and descriptions. You can edit any parameter by double-clicking on it or by using the buttons at the bottom of the list.
After setting all the parameters you want, you can click on "Write" to save them to your inverter. You can also click on "Read" to read them from your inverter or click on "Save" to save them to a file on your PC.
``` 061ffe29dd